The Ford Barn - View Single Post

flatheadmurre · 09-15-2019, 02:49 AM

You can use the exhaust manifolds from your 35 engine.
Don´t remember how tight it wil get in front if your new engine has a double sheave pulley...but if it´s an issue the outer sheave can be cut off nicely in a lathe.

09-15-2019, 02:49 AM	#12
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: 39 or 40 truck motor You can use the exhaust manifolds from your 35 engine. Don´t remember how tight it wil get in front if your new engine has a double sheave pulley...but if it´s an issue the outer sheave can be cut off nicely in a lathe.