Quote:
Originally Posted by tub1
don't have to change the mount drill a new hole in the area below the top mounting hole in the steering box housing much less work
|
Quote:
Originally Posted by Charlie ny
The '36 mount can be used and 2 holes will line up....you add the third. Hope
your motor is out. I did this switch on my '35....very happy upgrade.
Charlie ny
|
Our first attempt on this swap was to keep the '36 frame mounting plate and drill the extra hole in the steering box casting, exactly as suggested in these posts, and in our case, it would not work since the '37 steering box interfered with the exhaust manifold. So, at that time our only recourse was to remove the '36 mounting bracket and replace with a stock '37-'41 steering box mounting bracket. This was a royal pita on a completely assembled vehicle,
BUT the final results were well worth the effort!!