The Ford Barn - View Single Post

DavidG · 09-01-2020, 11:40 PM

Unless it is a super-early BB, each steady rod would have three holes in the center cross member for it if it were there originally. One about 7/8" diameter book-ended by two for 5/16" bolts to attach it to the cross member (it passes through the cross member and is installed through the rear of the cross member).

09-01-2020, 11:40 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: '32 BB rear engine mounts Unless it is a super-early BB, each steady rod would have three holes in the center cross member for it if it were there originally. One about 7/8" diameter book-ended by two for 5/16" bolts to attach it to the cross member (it passes through the cross member and is installed through the rear of the cross member).