The Ford Barn - View Single Post - 1930 Model A Gears Grind After New Clutch Install

Jacksonlll · 10-24-2020, 06:06 AM

Put the car in neutral with the clutch out and rev the engine. Then push the pedal down to the floor and wait about 20 sec. It should go into gear with no grinding. If not, adjust the clutch.

10-24-2020, 06:06 AM	#14
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: 1930 Model A Gears Grind After New Clutch Install Put the car in neutral with the clutch out and rev the engine. Then push the pedal down to the floor and wait about 20 sec. It should go into gear with no grinding. If not, adjust the clutch.