Re: Another turn signal question...need advice from electrical guru
Still having issues after re-checking everything. My question seems to be going back to the way I have the flasher itself connected. If you look at the diagram attached, it appears they are using a 2 pole flasher connecting the incoming power wire and the Pilot on one pole. I have it hooked up with a 3 pole flasher following the markings on the flasher:
Terminal X = power wire coming into the flasher
Terminal P = connected to the Pilot lamp lead
Terminal L = connected to the turn lamps through the signal switch
I'm going to try a 6 volt 2 pole flasher and wire it like the drawing to see if it makes any difference. Otherwise, guess I'll punt.
|