Quote:
Originally Posted by Don
Went for a drive today after replacing all wheel cyl You and MC this summer,good brakes but the further I drove ,about 20 miles,the brake pedal play was going away,had a full pedal with no play,thought the brakes might lock up , but they didn’t
Got home after about a 70 mile trip ,let set for awhile and pedal was back to normal,with about 1 1/2 inch play,what’s goin on,MC rod to long???
|
Master cylinder rod is adjusted incorrectly. There's a fine line between not long enough and too long. Yours is presently too long.
To keep as much pedal as possible, I'd suggest you shorten the rod perhaps but one full turn at a time. Drive it, see what happens. If necessary, reduce the length another full turn.
Yeah, a little time consuming but you'll end up with a nice "feeling" pedal.