View Single Post
Old 09-28-2020, 09:53 AM   #9
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: Question on Cam Gear Marks - UPDATE

Quote:
Originally Posted by Step-down View Post
So you found TDC turning motor both ways and using your math split in two for the dwell .
Great
You also dialed in the cam with your wheel checking timing .
That's my question as well, using a dial indicator can be a bit tricky unless you check it several times from both directions and split the difference. I much prefer a dead stop, but you can do it with a dial indicator. It would be fairly easy to double check it now with a stop placed through the sparkplug hole and turning the engine back and forth.
JSeery is offline   Reply With Quote