The Ford Barn - View Single Post - taillight stand under fender bracket picture request

deuce lover · 10-07-2019, 07:37 AM

The single bolt hole on the flat attaches to the lower stud on the tail light stand.The bolt hole on the bent over tab lines up to a fender bolt to the body .The wire from the tail light goes in the reveal (bead) slot to be concealed.Probably only on the coupe or cabriolet it would matter for the rumble step to brace it better.If you don't want to see the wiring I would install them.

10-07-2019, 07:37 AM	#4
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: taillight stand under fender bracket picture request The single bolt hole on the flat attaches to the lower stud on the tail light stand.The bolt hole on the bent over tab lines up to a fender bolt to the body .The wire from the tail light goes in the reveal (bead) slot to be concealed.Probably only on the coupe or cabriolet it would matter for the rumble step to brace it better.If you don't want to see the wiring I would install them.