here are the photos of pushing the piston to one side and the largest feeler in there .034 then pushing the piston to the other side and putting in the feeler. the videos show the shake in the bore. SO im going to take it apart and measure the bores with the proper tools at multiple locations in the bore and order a piston kit. or consider having it bored. The engine was noisey when reved but I thought that was just the lifters talking.
https://www.youtube.com/watch?v=YnXK...ature=youtu.be
https://www.youtube.com/watch?v=qKbI...ature=youtu.be
when I get a piston out ill take the proper measurements and post it on the thread along with piston pictures. I am assuming these are turned down A pistons or from something else.