The Ford Barn - View Single Post

bottomfeeder pete · 09-03-2010, 09:55 AM

Hello, I have taken my 59 a down to re-gasket and clean and inspect.I have the cam with the press on oil pump drive gear.There have been a few problems with the gears slipping. I have read about pinning the gear does anyone have a pic.of this. can you drill between the cam and gear put in an allen set screw.Thanx in advance Pete.

09-03-2010, 09:55 AM	#1
bottomfeeder pete Junior Member Join Date: May 2010 Location: lummi island wa. Posts: 20	oil pump cam gear Hello, I have taken my 59 a down to re-gasket and clean and inspect.I have the cam with the press on oil pump drive gear.There have been a few problems with the gears slipping. I have read about pinning the gear does anyone have a pic.of this. can you drill between the cam and gear put in an allen set screw.Thanx in advance Pete.