The Ford Barn - View Single Post

katy · 11-22-2020, 11:48 AM

I would remove the cable from the housing, clean both the cable and the housing interior w/solvent or diesel fuel, coat the cable w/chassis grease and re-install the cable in the housing making sure that the new grease coats the housing interior completely.

11-22-2020, 11:48 AM	#3
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,046	Re: speedo cable lubrication?? I would remove the cable from the housing, clean both the cable and the housing interior w/solvent or diesel fuel, coat the cable w/chassis grease and re-install the cable in the housing making sure that the new grease coats the housing interior completely. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!