The Ford Barn - View Single Post

Daves55Sedan · 09-22-2021, 06:03 PM

Still not sure about your Q1. The shocks are removed and installed from below. Remove two bolts from the mounting bracket holding the bottom stud of the shock and pull the bracket and shock absorber out of the spring.
There should be no need to hack at anything. The holes in the upper frame and lower shock mounting bracket for the shock studs are already the right size.

09-22-2021, 06:03 PM	#3
Daves55Sedan Senior Member Join Date: May 2010 Location: Granite City, Illinois Posts: 3,008	Re: quick questions Still not sure about your Q1. The shocks are removed and installed from below. Remove two bolts from the mounting bracket holding the bottom stud of the shock and pull the bracket and shock absorber out of the spring. There should be no need to hack at anything. The holes in the upper frame and lower shock mounting bracket for the shock studs are already the right size.