[Steve Staysko]

For the 1934 Roadster 40-710 and according to Ford’s assembly draw SK-12001 they installed friction tape at the following points. The friction tape that Ford used is very similar to the black cloth friction hockey stick blade tape that I used to tape up many a hockey stick in my youth!

Between the hinge pillar and hinge pillar to sill brace
Between the front body pillar and body to dash brace
Between the body hinge pillar to the quarter belt rail gusset and body hinge pillar
Between the front body pillar and pillar to floor brace
Between the seat side shield and floor pan
Between the front body pillar and pillar to floor brace
Between the package tray and seat back brace bracket
Between the package tray rear support and package tray
Between the seat back brace and floor pan brackets