Quote:
Originally Posted by GB SISSON
So you are saying the wire between the coil and distriburer cap? Anything to take the memory thing out of it. ..
|
As Kevin already answered, one of the small wires connected to the coil. Either the wire from the ignition switch to the coil or the wire from the coil to the distributor points. In your latest case the points must have been open, lucky you! Kevin's suggestion for a cut-out switch is a good one, but I would still remove the coil wire while trouble shooting. You could spend a considerable amount of time working around the car during the day and under the right conditions it doesn't take long to damage something with the ignition on.