The Ford Barn - View Single Post - '39

Charlie ny · 05-27-2021, 08:09 PM

Anybody got a loose '39 - '48 mast cyl they could measure the stroke for me ? And the '32 rear axle in my p'up causes the '40 backing plates to be rotated which in turn places the wheel cylinders at an angle, I'm concerned that some air might be trapped in the lower portion of the rear cylinders. Is there a way to bleed the rears or is this maybe me thinking
too much.

Thanks,
Charlie ny

05-27-2021, 08:09 PM	#1
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	'39 - '48 Master Cyl...rear hyds on a '32 Anybody got a loose '39 - '48 mast cyl they could measure the stroke for me ? And the '32 rear axle in my p'up causes the '40 backing plates to be rotated which in turn places the wheel cylinders at an angle, I'm concerned that some air might be trapped in the lower portion of the rear cylinders. Is there a way to bleed the rears or is this maybe me thinking too much. Thanks, Charlie ny Last edited by Charlie ny; 05-28-2021 at 06:15 AM. Reason: added yr of mc and brake bleeding