View Single Post
Old 09-01-2018, 11:28 PM   #6
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,480
Default Re: 29 Roadster ignition woes

Sponsored Links (Register now to hide all advertisements)
As Dave said, it should be 0 volts at the points, so maybe the distributor body isn't grounding through the head as well as it should. Try a jumper wire from a good ground to the condenser ground screw and see if you can now get 0 volts at the points contacts. I have a feeling you are using a digital meter. I like to use analog meters when working on cars, especially the Model A.
Tom Wesenberg is offline   Reply With Quote