View Single Post
Old 08-05-2020, 03:53 PM   #18
solidaxle
Senior Member
 
solidaxle's Avatar
 
Join Date: Mar 2011
Location: upstate NY
Posts: 478
Default Re: Mallory sbc to 8BA 4 lobe cam issues

This one says 49-53 Ford / Merc 6volt negative grd on the box. But you can wire them positive ground.

I suspect, all the Magsparks like this are the same unit. The part numbers change because of the mounting for each make of auto. It utilizes two condensers one on the dizzy and one on the coil. Different from the Olds Rocket picture above.


I'm using a YC, 4 lope with the contacts is series and one Mallory Best coil.


Going back to Charlies original question. Looking through the literature I have, the only two contact plates I see are one for 8cyl and one for 6cyl.
Attached Files
File Type: pdf Magspark .pdf (104.7 KB, 28 views)
File Type: pdf Magspark.pdf (108.5 KB, 16 views)
File Type: pdf Mallory plate.pdf (291.0 KB, 21 views)

Last edited by solidaxle; 08-05-2020 at 04:10 PM. Reason: adding attachment
solidaxle is offline   Reply With Quote