Re: 1951 flathead to C4 conversion
I used a Flat-o adaptor in my '55 with a y-block. Most everything you need in the kit. I think I would look for a later C-4 than a '65 tho. Perhaps '70 on up. JMO.
https://flat-o.com/carproducts/flatomatic.htm
I believe the kit H&H sells is from Flat-o.
Wilcap also makes Flathead adaptors but I think they are for mating a GM auto to the V-8.
http://wilcap.com/
__________________
Ruth
"Sometimes you really DO need to read the whole thread"
Last edited by Ruth; 09-25-2021 at 10:14 AM.
|