View Single Post
Old 08-05-2021, 04:29 AM   #8
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,125
Default Re: FRENCH Block With 4" Merc Crank

Quote:
Originally Posted by Mart View Post
DD, look upon the oil pan/starter/flywheel (ring gear) as a matched set. They must be from the same type of motor, normally 59A. Here in the UK the Lucas/Pilot parts add a possibility of parts mismatch but if you have all 59A compatible parts then you're ok.
59A type cam/2 bolt cover are also bolt ons. FWIW another French oddity is that the crank/cam gears are cut with the helix the same as 59A rather than 8BA.
And MORE valuable info. Thank you very much, Mart! DD


.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote