Quote:
Originally Posted by cabrioletgalaxie
I have acquired a back up light switch for my '47. It is a plunger type that mounts with a bracket, so I am told, on the steering column. I am looking for the bracket. A couple photos might help if someone has one in place that could tell me how to fabricate it. I have never seen one so do not know if it is a cast piece of flat stock which could be cut and shaped to fit.
Any help is appreciated.
David
[email protected]
207-590-0180 |
Hello, it mounts on the steering column down by the shifting rods,when put in reverse the rod comes up and contacts the plunger on the switch pushing it in to energize the switch make sure your power comes off the key or the light will stay on if left in reverse when motor is off thus killing your battery . The bracket can sometimes be found on eBay good luck John