Thread: Strange "Clanking Noise" at Idle
View Single Post
Old 07-28-2020, 07:02 PM   #5
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
Default Re: Strange "Clanking Noise" at Idle
It may have dropped a push rod [its not uncommon for a Y block] get a vacuum gauge and start from there.
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote