View Single Post
Old 05-28-2020, 02:43 AM   #11
DRG-ler
Senior Member
 
DRG-ler's Avatar
 
Join Date: Dec 2018
Location: Berlin / Germany
Posts: 182
Default Re: Scratching first gear?!?!

Quote:
So check your idle speed. Mine doesn't like to go into 1st if the idle is too high.
Hm ... I say, the idle speed is not very high. It is a little too high, but not much. This is because I also have the problem that the engine partly dies when stopping. It seems to be a most common problem, but I haven't been able to find out about it yet. I guess the speed is 50-100 rpm above normal.
Well, if you consider that the engine only makes 2200-2400 rpm, these are already worlds !! Do I have to take care of it ...

Which makes me think now ... If the clutch wears out over time, the clutch play should increase and not less.

The throttle valve works very smoothly. That fits so far.

Andy
DRG-ler is offline   Reply With Quote