Re: Hinge pins
My son and I built a 30 CCPU from parts collected from Sammy Guthries "bone yard". The cab was off an AA tanker truck which was restored with a much better cab . The cab was in dire state and the pins were frozen solid so I drilled,heated etc etc to no avail . I could see I was on a hiding to nowhere (English saying) and was beginning to disturb the hinge pillar connection .So I bit the bullet and with a thin cutting disc I cut a slot in the hinge and with a chisel I slightly opened it up and the pins then punched out .After the doors were off I ground a flat and migged the slot closed then with the deft use of my trusty angle grinder with a flapper disc the repair could not be seen . Doors went back OK but one pin migrates upwards over time but that will be an easy fix .
John in Suffolk County England .
|