The Ford Barn - View Single Post

Macdozer · 10-26-2014, 04:17 PM

I was hoping to reuse these valves if I can.

The only way I have been able to get the keepers to drop out is to lift the valve up with the bar "pickle fork tool" and place a piece of wood on top of the valve and hit it down with a hammer. Hoping this method is ok.

10-26-2014, 04:17 PM	#71
Macdozer Senior Member Join Date: Jun 2012 Location: Central NH Posts: 192	Re: 59 AB engine rebuild I was hoping to reuse these valves if I can. The only way I have been able to get the keepers to drop out is to lift the valve up with the bar "pickle fork tool" and place a piece of wood on top of the valve and hit it down with a hammer. Hoping this method is ok.