[Duffy1]

I bought the same dist you bought from the same vendor . Installed the dist . car would not start took dist out and apart found incoming wire touching housing . Moved wire off of housing put dist in car and started her up . Car ran for about and hour and then had the symptoms you describe. Lets see new dist ,points , cond . so can not be these three items so was thinking about working on the carb then I rembered what I had read on FB that 95% of carb . problems were electrical so I thought the situation and decided to change out the condenser . Problem solved . Also replaced the point with more robust points from NAPA . So I wonder if these dist are not tested prior to sales .