The Ford Barn - View Single Post - How To Lower The Model A The Old Fashion Way

Chris Haynes · 09-04-2018, 10:25 PM

My '32-'36 axle and wishbone are at the powder coaters now. New spring Perches from Snyder's. I have the 1/4" thick fender washers to take up the slack between the axle and wishbone. Gonna have to buy an 11/16" drill bit to finish them. Next I will order my new spring from Posies Super Slider springs for front and rear. While waiting for the springs my backing plates will go to the powder coater. Spindles and brake drums will get a bath in Parkerizing juice. Its getting close.

09-04-2018, 10:25 PM	#97
Chris Haynes Senior Member Join Date: May 2010 Location: Camarillo, CA and Pine Grove, CA Posts: 2,832	Re: How To Lower The Model A The Old Fashion Way My '32-'36 axle and wishbone are at the powder coaters now. New spring Perches from Snyder's. I have the 1/4" thick fender washers to take up the slack between the axle and wishbone. Gonna have to buy an 11/16" drill bit to finish them. Next I will order my new spring from Posies Super Slider springs for front and rear. While waiting for the springs my backing plates will go to the powder coater. Spindles and brake drums will get a bath in Parkerizing juice. Its getting close. __________________ 1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go?