Quote:
Originally Posted by Scott F.
Trying to fit my 32 actuators but something seems wrong. Can someone look at pics and help me to understand why this isnt working. My actuators seem too long. When the actuator is in the king pin ball the threaded hole/boss in actuator is probably half to .750" too far away.
|
Looks like the actuators and kingpins are on the wrong ends of the axle. Swap sides and put the arms up instead of down. Also the arms are riveted to the shaft backwards. The arms should be UP and OUTWARD, so they clear the shocks. OUTWARD means slanted toward the backing plates.