Quote:
Originally Posted by Minnesota Mike
here are my picks. Original restoration started in 1972. I have owned for 5 years and just complete the project, but there is a vibration when the engine is running. I think it is the flywheel. because i put a crankshaft with the balancing weights.
|
I had the same situation with the bad vibes. I used Les Andrews advice in his manual. Flywheel Housing Variation Measurement page 2-22 and Flywheel Wobble Test page 2-23. The housing, in my case, required .020 shims and the wobble indicated .015 which was corrected with a disc sander.