Thread
:
torque tube clam shell nut clearance problem
View Single Post
01-01-2021, 07:23 PM
#
1
fordyford
Senior Member
Join Date: May 2010
Posts: 192
torque tube clam shell nut clearance problem
Working on a 1934 with the captive ( not split ) u-joint cover. What nut should I use on the 7/16-20 studs at the rear of the transmission? There is not sufficient room to clear my socket wrench.
Keith
fordyford
View Public Profile
Send a private message to fordyford
Find More Posts by fordyford