The Ford Barn - View Single Post

FritzJr · 03-01-2018, 08:48 AM

You need to check the ring gap at the bottom of the cylinder bore. It could be that your cylinders are badly worn at the top. The bottom of the bore will be a better indication of the diameter to which they were bored.

03-01-2018, 08:48 AM	#8
FritzJr Senior Member Join Date: May 2010 Location: Northern Neck, VA Posts: 131	Re: Piston rings and size . Help You need to check the ring gap at the bottom of the cylinder bore. It could be that your cylinders are badly worn at the top. The bottom of the bore will be a better indication of the diameter to which they were bored.