The Ford Barn - View Single Post

bobwellsnoveltyshop · 12-04-2018, 05:35 PM

Maybe in the ground circuit, sometimes a sealant is used on the threads and you don't have a good ground, before taking the sender back out try using a wire to the sender base and a good ground.

12-04-2018, 05:35 PM	#7
bobwellsnoveltyshop Senior Member Join Date: May 2010 Posts: 779	Re: '34 dual gauge problem Maybe in the ground circuit, sometimes a sealant is used on the threads and you don't have a good ground, before taking the sender back out try using a wire to the sender base and a good ground.