Re: Best way to fix this header
Sponsored Links (Register now to hide all advertisements)
It would be best to bolt the header onto a block if you have one handy. Next if I was doing the repair I would make a steel patch that would over lap the original welded area. The overlap would be much stronger as long as the tubing is not deteriorated internally. The weld would be Tig a much better way of completing the repair.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
|