View Single Post
Old 10-18-2020, 01:02 PM   #4
GRutter
Senior Member
 
GRutter's Avatar
 
Join Date: Sep 2017
Location: Mint Hill, North Carolina
Posts: 230
Default Re: King pin felt washer orientation

If rotorwrench is correct in the orientation of the felt and washer, my apologies.

I have always placed the cupped washer facing down and the felt against the spindle, so it could not collect water. Also, as it is grease fittings are in the spindle, it would make sense that the felt would be next to the spindle, not the axle.

Perhaps other members could advise.
GRutter is offline   Reply With Quote