View Single Post
Old 09-09-2020, 08:28 AM   #4
Kevin in NJ
Senior Member
 
Join Date: May 2010
Location: South East NJ
Posts: 3,227
Default Re: 1931 68C Cabriolet Fitting Quarter Body Panels

Sponsored Links (Register now to hide all advertisements)
The turnbuckles are not for body adjustment. They are structural as the top connection to the cowl will exert a lot of force at the triple hinge as the body flexes.

The adjustments for the cowl doors to qtrs fit are done with cowl movement/ shims. The bottom fit has to do with how the bottom of the wood pillars are fit. The top fit wider or narrower is done by shimming the 2 braces that go from the upper panel seams to the wood sills.

The landaus work by having a bit of compression. This is done during top installation. If the center hinge point is loose then you will have problems making this happen properly.
__________________
Cabriolet and Technical Hints
Kevin in NJ is offline   Reply With Quote