The Ford Barn - View Single Post - Helpful Tips: Removing Perch Bolts From The Front Axle, Model A

Terry, NJ · 08-29-2020, 01:08 PM

You can heat anything, ......A little! 4-500 degrees ought not disturb the temper. Henry did say Bend Cold! A nut and bolt loosener that's better is 1 part acetone to one part ATF. This has been proven so many times I'm surprised no one sells it commercially.
Terry

08-29-2020, 01:08 PM	#18
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,740	Re: Helpful Tips: Removing Perch Bolts From The Front Axle, Model A You can heat anything, ......A little! 4-500 degrees ought not disturb the temper. Henry did say Bend Cold! A nut and bolt loosener that's better is 1 part acetone to one part ATF. This has been proven so many times I'm surprised no one sells it commercially. Terry