View Single Post
Old 08-08-2020, 09:27 AM   #5
Licensed to kill
Senior Member
 
Licensed to kill's Avatar
 
Join Date: Aug 2016
Location: Alberta
Posts: 915
Default Re: Engine Knock at 2000 RPM

Quote:
Originally Posted by Sheldon Paulger View Post
I had my 1930 model A engine rebuilt about 1200 miles ago. It was rebored, babbitt removed and shell bearings installed. I could hear a light knock from the beginning. The engine re-builder claimed all was normal.

Last winter, he agree to re-inspect the engine if I removed it from the frame. He dismantled it and while he had it apart, I had a Synders touring camshaft install and a Snyders 6:1 high compression head installed. The re-builder claimed he could find nothing out of order with his rebuild.

The engine seems to sound normal at low RPM but rattles as 2000 RPM is reached.

Read a couple threads talking about pistons hitting the head or the head gasket if it protrudes into the bore.

Any other ideas? Any way to check pistons hotting head or gasket without removing the head.
Pull the plugs and look at the top of the pistons with a bore scope. If they are touching there should be a mark left on the piston.
Licensed to kill is offline   Reply With Quote