The Ford Barn - View Single Post

Cpuckett · 03-22-2020, 08:26 PM

Hello, I’ve pulled the left side axle housing off and removed the entire axle. I’m wanting to replace the seals to keep the rear end grease from leaking into my drums. I have the 2 correct seals I believe. They are about an inch to inch 1/4 in diameter, red on outside with rubber on inside but I can’t figure out where the old ones are at to remove those. Thanks in advance
Carroll

03-22-2020, 08:26 PM	#1
Cpuckett Member Join Date: Mar 2020 Location: Charlotte NC Posts: 63	31 Model A rear end seals Hello, I’ve pulled the left side axle housing off and removed the entire axle. I’m wanting to replace the seals to keep the rear end grease from leaking into my drums. I have the 2 correct seals I believe. They are about an inch to inch 1/4 in diameter, red on outside with rubber on inside but I can’t figure out where the old ones are at to remove those. Thanks in advance Carroll Last edited by Cpuckett; 03-22-2020 at 08:36 PM.