The Ford Barn - View Single Post

Synchro909 · 01-01-2020, 05:26 PM

I recently had a key made for an original door handle. If you look at the square shaft that goes into the door on an original handle, you will see a code stamped on it. It will be "A****". That is, A and four digits. I quoted that number to a vendor over there and he had his locksmith make a couple of keys for me. Because you guys are so far away, the locksmith also supplied a couple of blanks so that if his didn't work (they did), I could have a local guy cut a key for me.

01-01-2020, 05:26 PM	#15
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: Lost key for 1931 Victoria I recently had a key made for an original door handle. If you look at the square shaft that goes into the door on an original handle, you will see a code stamped on it. It will be "A****". That is, A and four digits. I quoted that number to a vendor over there and he had his locksmith make a couple of keys for me. Because you guys are so far away, the locksmith also supplied a couple of blanks so that if his didn't work (they did), I could have a local guy cut a key for me. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.