The Ford Barn - View Single Post

desotoguy · 07-13-2022, 06:33 AM

Have been reading the post and trying to educate myself on toe in alignment. Thinking about the last car that I had aligned, the device on the wheels were at the center of the spindle. Considering the bar and the plates described, they appear to be below the spindle centerline, that being the case and considering the castor and camber angles associated with the front axle, will the devices actually produce the correct measurement?

07-13-2022, 06:33 AM	#42
desotoguy Senior Member Join Date: Nov 2011 Location: Greenwood SC Posts: 294	Re: toe in tool Have been reading the post and trying to educate myself on toe in alignment. Thinking about the last car that I had aligned, the device on the wheels were at the center of the spindle. Considering the bar and the plates described, they appear to be below the spindle centerline, that being the case and considering the castor and camber angles associated with the front axle, will the devices actually produce the correct measurement?