The Ford Barn - View Single Post

petehoovie · 08-18-2020, 04:31 PM

Thanks for your reply, Mike. I won't know what flywheel I have until I pull the tranny - my flywheel could have been replace sometime in the past. I'm thinking that if I do have an original recessed/stepped flywheel, I would be better off replacing it with a flat non-recessed style. Am I correct in assuming the original flywheel is strictly for a 9 inch clutch and that the 35-up flywheel will accommodate a 10-10 1/2 inch clutch?

Do you sell a kit that includes the 10-10 1/2 inch flywheel with ring gear, clutch disc and pressure plate?

08-18-2020, 04:31 PM	#8
petehoovie Senior Member Join Date: May 2015 Posts: 8,166	Re: Pressure Plate Thanks for your reply, Mike. I won't know what flywheel I have until I pull the tranny - my flywheel could have been replace sometime in the past. I'm thinking that if I do have an original recessed/stepped flywheel, I would be better off replacing it with a flat non-recessed style. Am I correct in assuming the original flywheel is strictly for a 9 inch clutch and that the 35-up flywheel will accommodate a 10-10 1/2 inch clutch? Do you sell a kit that includes the 10-10 1/2 inch flywheel with ring gear, clutch disc and pressure plate? __________________ The only thing nice about being imperfect is the joy it brings to others.... *"Silver rings, your butt! Them's washers!"* "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0