Quote:
Originally Posted by dmsfrr
one or two(?) of the junction blocks in the wiring harness at the front of the car have a jumper between some terminals.
|
dmsfrr is right and this is very important to tag the junction blocks at to their use (turn signal or headlight) wiring, A N D get a 1956 Ford car shop manual that shows connections to junction block on page 269.
dmsfrr referred to "jumpers" but they are actually internal to the junction block and you can see them by turning the junction block and looking at the metal connectors inside the holes of the block. (these are what I referred to in an earlier post as "double-taps").