View Single Post
Old 08-20-2018, 07:50 AM   #16
Neil Wilson
Senior Member
 
Neil Wilson's Avatar
 
Join Date: May 2010
Location: Boulder, CO
Posts: 559
Default Re: Spring Repair - broken Perimeter wire?

Quote:
Originally Posted by Terry, NJ View Post
My error! Mia Culpa! Go to the albums again. Open all the albums and you'll see "My Coupe" (Red wheels) On the first page of the album, 3rd row down, 5th pic across is the pic I thought was in the "My A" album. Go to a body shop supply house that handles Au-ve-co products and Auveco ( www.auveco.com) makes all sorts of clamps, clips and rings for the upholstery trade. I used # 7707 clamp, clip to secure the back end of the perimeter wire. It was something like $7 @ box of 100 about three or four years ago. My apology for sending you to the wrong album.
Terry

Thanks Terry, I found the picture and the Auveco clamp. It looks like I could use the clamp on my existing perimeter wire. It has one clean break.


Thanks for your held.
__________________
[email protected] - email contact

https://aafords.com Ford Model AA Truck Club @ aafords.com
Neil Wilson is offline   Reply With Quote