The Ford Barn - View Single Post

jrvariel48 · 09-14-2020, 04:18 PM

So I'm having my machinist make me a 3/8" thick washer at the proper diameter (1.750 OD) with a grade 8 bolt and the Nord-Lock system. I'll torque to 65-70 lbs and check it everytime I go for a ride. I also like the thought of tie wire and will do that if I find it loose again.

I appreciate all the input and will post the results!
Thanks again to everyone!
Joe

09-14-2020, 04:18 PM	#33
jrvariel48 Senior Member Join Date: Jan 2012 Location: New Jersey Posts: 1,427	Re: Crank pulley bolt...Lost again!! So I'm having my machinist make me a 3/8" thick washer at the proper diameter (1.750 OD) with a grade 8 bolt and the Nord-Lock system. I'll torque to 65-70 lbs and check it everytime I go for a ride. I also like the thought of tie wire and will do that if I find it loose again. I appreciate all the input and will post the results! Thanks again to everyone! Joe