View Single Post
Old 12-04-2021, 12:47 PM   #48
Harold Degand
Member
 
Join Date: Dec 2019
Location: Belgium, West Europ
Posts: 85
Default Re: 1932 clutch issue

Quote:
Originally Posted by Mart View Post
But is that extra movement free play? Or is the bearing in contact with the fingers at that position? If the floorboards were in position it would not come up that far.
Try and adjust the length so the clutch is just released at about 2/3 of pedal travel. Then see where the pedal sits when just clear of the bearing. Mock up or imagine a floorboard in place which gives both an upper and lower travel limit for the pedal.
Mart.
Yes, it works great.
And you’re right, the floor will limit the movement of the pedal in one way and the other.
Harold Degand is offline   Reply With Quote