The Ford Barn - View Single Post

Bored&Stroked · 11-29-2021, 01:57 PM

The hub/bearing looks standard to me . . . it is just WAY forward before it engages with the clutch forks/fingers. I think there is something wrong with the clutch and/or disc combination - that results in the clutch fingers being way closer to the flywheel than the original clutch you had in it.

Just to ask an obvious question - is the clutch disc correctly installed and the springs are NOT hitting the flywheel bolts?

11-29-2021, 01:57 PM	#37
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,062	Re: 1932 clutch issue The hub/bearing looks standard to me . . . it is just WAY forward before it engages with the clutch forks/fingers. I think there is something wrong with the clutch and/or disc combination - that results in the clutch fingers being way closer to the flywheel than the original clutch you had in it. Just to ask an obvious question - is the clutch disc correctly installed and the springs are NOT hitting the flywheel bolts?