Re: Throttle Bracket Rubbing
it looks to me that someone has added a new end onto the arm and it is a bit too thick.
if function is more important than correctness then if it were I, just file or grind some clearance into the new section.
if correctness is important then you will have to
1-replace the whole thing
2-cut off that pc and weld on a correct chunk
or
3-reshape the whole thing with a grinder or file.
__________________
old ugly
my old father-in-law told me. "listen close when people tell you how to do stuff they may know something. then do it the way you want."
|