The Ford Barn - View Single Post

Harold Degand · 11-24-2021, 02:33 PM

My engine is a 3.9 L. The flywheel is the same as Ford except they are drilled for 11’’ clutch.
I think the issue is the missing adjusters. So the plate isn’t thick enough.
With the rod in a normal size, I mean not full unscrewed or screwed, my pedal is close to the floor when the bearing contact the plate.

11-24-2021, 02:33 PM	#25
Harold Degand Member Join Date: Dec 2019 Location: Belgium, West Europ Posts: 87	Re: 1932 clutch issue My engine is a 3.9 L. The flywheel is the same as Ford except they are drilled for 11’’ clutch. I think the issue is the missing adjusters. So the plate isn’t thick enough. With the rod in a normal size, I mean not full unscrewed or screwed, my pedal is close to the floor when the bearing contact the plate.