The Ford Barn - View Single Post

Bruce Lancaster · 05-14-2010, 12:53 PM

Same points fit 1937--1948 and also the oddball Model 68, late 1936 with cylindrical/ pillbox looking coil. '32-36 use another set with the movable points connected on a long spring. I just posted NAPA number on some post here?? For a while they were screwed up...I ordered some at different times from Napaonline and kept getting 3/4 of the set. Wrote'em an email, pointing out that they had a correct picture of the set, and they sent me the missing bits. I think it is corrected now...some spec along the way, probably for the guy dumping parts into boxes, was likely rong. Still have it up...ECH CS47...finding stuff at napaonline is an annoying process!

05-14-2010, 12:53 PM	#17
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Helment distributor rebuild tech Same points fit 1937--1948 and also the oddball Model 68, late 1936 with cylindrical/ pillbox looking coil. '32-36 use another set with the movable points connected on a long spring. I just posted NAPA number on some post here?? For a while they were screwed up...I ordered some at different times from Napaonline and kept getting 3/4 of the set. Wrote'em an email, pointing out that they had a correct picture of the set, and they sent me the missing bits. I think it is corrected now...some spec along the way, probably for the guy dumping parts into boxes, was likely rong. Still have it up...ECH CS47...finding stuff at napaonline is an annoying process!