Thread: Frankenengine
View Single Post
Old 11-27-2020, 08:55 PM   #16
David R.
Senior Member
 
Join Date: Aug 2016
Location: West Virginia
Posts: 430
Default Re: Frankenengine

The ‘28 engine I gave $50 for. Block might be repaired if you stitched cracks and sleeved one cylinder It has a useable crank and camshaft. I had a generator I rebuilt that has a bad armature. Turns out the armature in the $50 engine was good so I came out ok on it. The 31 was a complete engine for $300 but he wouldn’t take any money for it until I find out if the block is good. I could still use my ‘30 block if I had to, and repair freeze crack in water jacket.
David R. is offline   Reply With Quote