View Single Post
Old 11-04-2011, 09:02 AM   #13
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,007
Default Re: Dropped axle question

Use the Magnum axle designed for the 37-40 cars/pickups and it will fit your stock wishbone. Use the Chassis Engineering bolt on steering arms. The bolt passes all the way through the arm and into the spindle on the brake side. If you use a nylock nut you will never have a problem. I've used this system on four cars and never had a problem. I'm not big on Monoleaf springs as I had a friend who had one break on a tour. That could have been a rare instance, but it cured me from wanting to use one.
TJ is offline   Reply With Quote